150 A
Roll over image to zoom in
Flat Half-Pin Stone Anchor (150-A)
Part Number: 150-A
Made to Order.
For tying stone or CMU walls together. Specify thickness, length, width, pin diameter and length, location of pin and steel type.
Available Thickness: 1/2", 3/8", 1/4", 3/16", 1/8", 12 gauge, 14 gauge, 16 gauge
Pin Diameters: 1/4", 3/8", 1/2", 5/8"
Available in Type 304 and Type 316 Stainless Steel
Specify Location of Welded Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended.
150 A Submittal SheetMaterials/Finishes
Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)
