Mobile Nav Open Mobile Nav Close
152
152

Roll over image to zoom in

L-Stone Pin Anchor (152)

Part Number: 152

Made to Order.

For tying stone or CMU walls together. Specify thickness, length, width, bend length, pin diameter and length, location of pin and steel type.

Available in Type 304 and Type 316 Stainless Steel.

Available Thickness: 1/2”, 3/8”, 1/4”, 3/16” 1/8”, 12 gauge, 14 gauge, 16 gauge.

Available Pin Diameters: 1/4", 3/8”, 1/2”, 5/8”

Specify gauge, width, length, bend length pin diameter and pin length.

Specify Location of Welded Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended.

Pins are available loose or welded in place

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

152 L-Stone Pin Anchor

Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended. 

Pins are available loose or welded in place

Note: $400 minimum total per order

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized:  Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

 

Help from the Experts