Diameter of Rod:

• 1/8"
• 3/16"
• 1/4"
• 3/8"
• 1/2"
• 5/8"

Materials:

• Stainless Steel
• Hotdip Galvanized After Fabrication
• Mill Galvanized (3/16" & 1/4" only)
• Plain Steel

J-Hook Opening:

• Specify opening of the J-Hook.

Rod Length:

• Specify rod length from the inside of the hook to the inside of the bend.

J-Hook Return:

• Specify length of the return of the J-Hook measured from the i.d. of the J-Hook.

Bend:

• Specify the i.d. length of the bend.

• IMPORTANT! To prevent cracking or stress on the steel the inside diameter of the J-Hook should be a minimum of twice the thickness of the material. EXAMPLE: 1/4" diameter rods should have a minimum of 1/2" i.d. opening.

Note: