#174

Threaded

Eye-Bolt

 

 

MADE TO ORDER

  • Click For Available Resources

Diameter of Rod:

Thread Length:

Materials:

  • 1/4"
  • 3/8"
  • 1/2"

Rod Length:

  • Specify rod length from the inside of the eye.
  • Specify thread length from the end of the rod.

Eye Opening:

  • Specify i.d. opening of the J-Hook.
  • Stainless Steel
  • Hotdip Galvanized After Fabrication
  • Electro Galvanized After Fabrication
  • Mill Galvanized (1/4" only)
  • Plain Steel

Note:

  • IMPORTANT! To prevent cracking or stress on the steel the inside diameter of the eye should be a minimum of twice the thickness of the material. EXAMPLE: 1/4" diameter rods should have a minimum of 1/2" i.d. opening.
  • If you are using a dowel in the eye, the eye should be 1/16" larger than the diameter of the dowel. EXAMPLE: a 1/2" dowel will fit in a 9/16" eye.
  • Threaded Eye-Bolt can be furnished with or without a nut and washer.