Twisted L-Type

Column Anchor

Used to anchor masonry walls to structural

columns where the column flanges are

perpendicular to the masonry wall.




  • Click For Available Resources

Standard Strap Thickness:

Strap Length:


  • 1/8"

Standard Strap Width:

  • 1-1/4"

Standard Bends:

  • 1-1/2" bend into masonry.
  • 1-1/4" hook at the column.
  • Specify length as measured from the inside of the hook to the start of the twist.
    (This is the dimension of the flange of the beam.)
  • Also specify the overall length of the anchor from end to end.
  • Twist is 1-1/2" long.
  • Stainless Steel
  • Hotdip Galvanized After Fabrication
  • Mill Galvanized


  • If there is an airspace between the column and the wall then the two straps should be welded or bolted to the column to prevent movement from compression.
  • Optional holes available for bolting to column.
  • Order one left, one right, & wall tie:
    #195-L & #195-R