#197-T

Twisted Corrugated

Column Anchor

Used to anchor masonry walls to structural

columns where the column flanges are

perpendicular to the masonry wall.

 

 

MADE TO ORDER

  • Click For Available Resources

Standard Strap Thickness:

Strap Length:

Materials:

  • 1/8"

Standard Strap Width:

  • 1-1/4"

Standard Corrugated Section:

  • 4-1/2"
  • Specify length as measured from the inside of the hook to the start of the twist.
    (This is the dimension of the flange of the beam.)
  • Also specify the overall length of the anchor from end to end.
  • Twist is 1-1/2" long.
  • Stainless Steel
  • Hotdip Galvanized After Fabrication
  • Mill Galvanized

Note:

  • If there is an airspace between the column and the wall then the two straps should be welded or bolted to the column to prevent movement from compression.
  • Optional holes available for bolting to column.
  • Order by piece. Anchors are reversible for top or bottom side use.