Screw-On Split-Bend Stone Anchor (274)

 #274 Screw-On Split-Bend Anchor 

MADE TO ORDER 

 Thickness: 3/8", 1/4", 3/16", 1/8", 11 gage, 12 gage, & 14 gage.Strap Width: 1-1/4" minimum recommended. Minimum width for 1/4" thick is 2" wide. Length: Specify length as the outside dimensions between the bends. Bend with Hole: 1" minimum recommended. You should consider the overall length of the anchor and the height of the split bend to make sure there is enough room for the installer to get the screw and tool in place without interference from the split bend. Hole should be a minimum of 1/16" larger than your screw size. (3/8" screw will use a 7/16" diameter hole). Split Bend: Minimum 3/4" recommended (specify as o.d. dimension) Available in type 304 or Type 316 Stainless Steel or ZInc Alloy 710 material as a Firewall Anchor.

Note: $400 minimum total per order

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Firewall Anchors: Rolled Strip Zinc Alloy 710.(Firewall alloy 1/8” only)