Mobile Nav Open Mobile Nav Close
85
85

Roll over image to zoom in

Cell Vents (85)

Part Number: 85

Cell vents are installed in the bottom vertical mortar joint of a brick veneer wall to allow moisture to vent out of a cavity wall. Cell vents are also installed at the top of the wall to allow ventilation in the cavity. They consist of many small adjacent passageways, which allow moisture to vent from the cavity to the exterior of the building while restricting ingress of insects. The cellular composition provides easy drainage for moisture along the full height of the head joint. Cell vents are UV-resistant and tested in conformance to ASTM D2240, D790B, D638 and D1238B.

Regular Size: 3/8" thick x 2-1/2" high x 3-3/8 deep.
Jumbo Size: 3/8" thick x 3-1/2" high x 3-3/8" deep.

Available in Tan, Brown, Clear, Cocoa, Black, White and Gray

Louvered Weep Vents come in three sizes: Standard (85LSTD) 2-1/2", Medium (85LCSR) 2-3/4" and Jumbo (i5LJUM) 3-5/8". Louvered front allows water to leave and not re-enter. Available in Gray only.

200 pcs per box.

Also available to

Buy Online

Features and Benefits

Allows moisture to vent to exterior of the building

Provides easy drainage for full head joint height

Materials/Finishes

Colors: Tan, Brown, Clear, Cocoa, Black, White and Gray

#85 Cell Vent 

Cell vents are installed in the bottom vertical mortar joint of a brick veneer wall. It consists of many small adjacent passageways, which allows moisture to vent from the cavity to the exterior of the building while restricting ingress of insects. The cellular composition provides easy drainage for moisture along the full height of the head joint. Manufactured from polypropylene. Cell vents are UV resistant and tested in conformance to ASTM D2240, D790B, D638 and D 1238B. The TMS402 Building Code requires weeps be spaced less than 33” on center. 

200 pcs per box

Note: $200 minimum total per order

Help from the Experts