Masonry Wall

Stabilizing Anchors

These anchors are used to resist lateral loads at the top of masonry walls. They allow vertical deflection of the slab above while compressive loads are not transferred to the masonry wall below. The rods are 3/8” diameter x 6” long and the flat anchors are 12 gage.

 

A plastic tube is embedded in the mortar to prevent the rod from bonding with the mortar. Available in Hotdip Galvanized or Stainless Steel.

Wall Diagram

  • Attach to existing concrete slab or weld to structural beam.
  • Use with #421 Plastic Tubes.
  • #419 Available Resources

  • Attach to existing top slab and slide CMU inside bends.
  • Plastic tubes not required.
  • #420 Available Resources

  • For use with Rod Anchors extending into masonry wall.
  • Comes with compressible filler.
  • #421 Available Resources

  • For use with Flat Anchors extending into masonry wall.
  • Comes with compressible filler.
  • #422 Available Resources

QUICK LINKS

FOLLOW US

Submitting Form...

The server encountered an error.

Form received.

Heckmann Building Products