Used to attach structural members, veneers, or equipment to concrete structures. Plates and Angles can also be used to frame openings in concrete walls or as shelf angles. Use with precast or cast-in-place concrete. Custom fabricated to your design requirements. Specify catalog numbers, dimensions, slots, holes, anchors and other requirements.
Options: Holes, slots, gussets, dowels and toe bars. Optional nail holes are typically 3/16" (4.76 mm) diameter and allow anchor plates to be fastened to inside faces of forms.
NOTE: Punched holes are more economical than drilled holes, but punch diameter must be greater than or equal to the thickness of steel.)
Click For Available Resources
Materials & Finishes
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.