Roll over image to zoom in
Cell Vents (85)
Part Number: 85
Cell vents are installed in the bottom vertical mortar joint of a brick veneer wall to allow moisture to vent out of a cavity wall. Cell vents are also installed at the top of the wall to allow ventilation in the cavity. They consist of many small adjacent passageways, which allow moisture to vent from the cavity to the exterior of the building while restricting ingress of insects. The cellular composition provides easy drainage for moisture along the full height of the head joint. Cell vents are UV-resistant and tested in conformance to ASTM D2240, D790B, D638 and D1238B.
Regular Size: 3/8" thick x 2-1/2" high x 3-3/8 deep.
Jumbo Size: 3/8" thick x 3-1/2" high x 3-3/8" deep.
Available in Tan, Brown, Clear, Cocoa, Black, White and Gray
Louvered Weep Vents come in three sizes: Standard (85LSTD) 2-1/2", Medium (85LCSR) 2-3/4" and Jumbo (i5LJUM) 3-5/8". Louvered front allows water to leave and not re-enter. Available in Gray only.
200 pcs per box.
Resources
85 Submittal SheetFeatures and Benefits
Allows moisture to vent to exterior of the building
Provides easy drainage for full head joint height
Materials/Finishes
Colors: Tan, Brown, Clear, Cocoa, Black, White and Gray
