Mobile Nav Open Mobile Nav Close

Roll over image to zoom in

Double Pintle Tie (263)

Part Number: 263

Used to secure a masonry veneer to a masonry backup wall with #262 Double Eye Rod or Pintle/Eye Wire reinforcement.

Features and Benefits

3/16" diameter wire

Width: 2-1/2"

Lengths: 2-3/4" and 4-3/4"


Mill galvanized
Hot-Dip Galvanized after fabrication

 #263 Double Pintle Tie 

The 14 gage anchor is attached directly to the backup system. Insulation is then placed above and below the wire tie tab. (Note: If ties are placed 16” on center, your insulation will have to be in 16” strips). Pintle ties are placed in the tabs allowing for 1 ¼” vertical adjustment above or below the tab. 

Note: $200 minimum total per order

Thickness: 3/16” 

 Width: 2” 

Material Specifications 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Wire: ASTM A 641 (0.1 oz/ ft2.) 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

Help from the Experts