Mobile Nav Open Mobile Nav Close
360 with wire
360 with wire

Roll over image to zoom in

L-Type Seismic Veneer Anchor (360)

Part Number: 360

Made to Order

Used for attaching brick veneer to backups in seismic zones requiring a reinforcement wire in the exterior brick veneer. The corrugated end increases adhesion in the mortar joint.

Raised tab in flat section allows for placement of Pencil Rod or Masonry Wall Reinforcement that allows for in plane horizontal and vertical movement of the masonry walls while restraining tension and compression.

14 gauge x 1-1/4" wide plus a 1-1/2" bend with a centered 5/16" diameter hole.

Type 304 Stainless Steel.

Available in overall lengths of 2-1/2" 3", 3-1/2", 4", 4-1/2", 5", 5-1/2", 6", 7" and 8".

Materials/Finishes +

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

#360 Seismic L-Type Veneer Anchor

Used for attaching brick veneer to backups in seismic zones requiring a reinforcement wire in the exterior brick veneer.

Raised tab in flat section allows for placement of Pencil Rod or Masonry Wall Reinforcement. This allows for the in plane horizontal and vertical movement of the masonry walls while restraining tension and compression.

(NOTE – The code requirement for exterior wall reinforcement in seismic zones D, E and F have been removed from the TMS402 Masonry Code 2013 version and IBC 2015)

Note: $200 minimum total per order

Standard: 1-1/4" wide + 1-1/2" Bend with a 5/16" centered hole

14 Gauge - Type 304 Stainless Steel

Material Specifications:

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304.

Wire ties and anchors: ASTM A 580 AISI Type 304

Help from the Experts