Mobile Nav Open Mobile Nav Close
276
276

Roll over image to zoom in

Screw-On Pin Stone Anchor (276)

Part Number: 276

MADE TO ORDER: Thickness of Strap: 3/8", 1/4", 3/16", 1/8", 11 gage, 12 gage, & 14 gage. Diameter of Pin: 1/4", 3/8", 1/2", 5/8" Strap Width: 1-1/4" minimum recommended. Length: Specify length of strap to o.d. of bend and overall length of pin. Bend Length: minimum 3/4" recommended (specify o.d. dimension) Available in Stainless Steel and Hotdip Galvanized After Fabrication Bend Hole: Usually centered in bend. Hole should be 1/16" larger than screw/expansion anchor. (i.e. If using a 1/4" screw the hole diameter would be 5/16".) Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended. Pins are available loose or welded in place.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

276 Screw-On Pin Stone Anchor

MADE TO ORDER: Thickness of Strap: 3/8", 1/4", 3/16", 1/8", 11 gage, 12 gage, & 14 gage. Diameter of Pin: 1/4", 3/8", 1/2", 5/8" Strap Width: 1-1/4" minimum recommended. Length: Specify length of strap to o.d. of bend and overall length of pin. Bend Length: minimum 3/4" recommended (specify o.d. dimension) Available in Stainless Steel and Hotdip Galvanized After Fabrication Bend Hole: Usually centered in bend. Hole should be 1/16" larger than screw/expansion anchor. (i.e. If using a 1/4" screw the hole diameter would be 5/16".) Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended. Pins are available loose or welded in place. 

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)  

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Help from the Experts