Mobile Nav Open Mobile Nav Close
443
443

Roll over image to zoom in

Steel Horse-Shoe Shim Washers (443)

Part Number: 443

Used for shimming anchors and angles for out-of-plumb walls.

Typical sizes are 2” x 2” and 2” x 3” in thicknesses 1/16”, 1/8” and 1/4” available in Stainless Steel, Plain Steel, Hotdip Galvanized, or Mill Galvanized (1/16” and 1/8” only).

Standard Slot is 13/16” x 1-1/2”.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08

#443 Horseshoe Shims 

 Typical sizes are 2” x 2” and 2” x 3” in thicknesses 1/16”, 1/8” and 1/4” available in Stainless Steel, Plain Steel, Hotdip Galvanized, or Mill Galvanized (1/16” and 1/8” only). 

Standard Slot is 13/16” x 1-1/2”. 

Specify thickness, length, width, type of steel, slot size and location of slot. 


Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Wire: ASTM A 641 (0.1 oz/ ft2.) 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 


Help from the Experts