Mobile Nav Open Mobile Nav Close
586
586

Roll over image to zoom in

Twisted Joist Pin Anchor (586)

Part Number: 586

Used to anchor wood joists to a masonry wall. Pin section is grouted into the CMU wall and the strap is nailed to the floor joists.

Standard: 1/8" x 1" wide Mill Galvanized.

Two Sizes:

18" with 3 holes
14" with 2 holes

Holes spaced 3” o.c. starting ¾” from end

Pin: 3/8" diameter x 5” long

Twist starting 4” from pin

Features and Benefits

Anchor wood joists to a masonry wall

Materials/Finishes

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

#586 Twisted Joist Pin Anchor 

Used to anchor wood joists to a masonry wall. Pin section is grouted into the CMU wall and the strap is nailed to the floor joists. Fixed Pin is 3/8” diameter x 5” long centered 1” from end of anchor. 


Standards:

Thickness: 1/8” Width: 1”

Center of Pin to End: 1” 

Pin is 3/8” diameter x 5” and is fixed in place. 

7/32” nailing holes (centered ¾” from end and 3” o.c.) 

Finish: Mill Galvanized 

Material Specifications 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Wire: ASTM A 641 (0.1 oz/ ft².) 

Help from the Experts