Mobile Nav Open Mobile Nav Close
275 U
275 U

Roll over image to zoom in

U-Screw-On Stone Anchor (275-U)

Part Number: 275-U

Made to Order

Thickness: 3/8", 1/4", 3/16", 1/8", 11 gage, 12 gage, & 14 gage.

Strap Width: 1-1/4" minimum recommended.

Length: Specify length as the outside dimensions between the bends.

Bend with Hole: 1" minimum recommended. You should consider the overall length of the anchor and the height of the bend to make sure there is enough room for the installer to get the screw and tool in place without interference from the U-Bend. Hole should be minimum of 1/16" larger than your screw size. (3/8" screw will use a 7/16" diameter hole).

Bend Length: Minimum 3/4" recommended (specify as o.d. dimension)

Available in Type 304 and Type 316 Stainless Steel and Zinc Alloy 710 Firewall Material.

Made to Order.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304.
(AISI Type 316 available upon request)

Firewall Anchors: Rolled Strip Zinc Alloy 710. (Firewall alloy 1/8” only)

Related Products

#275 Bent-Type Screw-On Anchor

Available as 275-U or 275-Z  


Made to Order

Thickness: 3/8", 1/4", 3/16", 1/8", 11 gage, 12 gage, & 14 gage.

Strap Width: 1-1/4" minimum recommended.

Length: Specify length as the outside dimensions between the bends.

Bend with Hole: 1" minimum recommended. You should consider the overall length of the anchor and the height of the bend to make sure there is enough room for the installer to get the screw and tool in place without interference from the U-Bend. Hole should be minimum of 1/16" larger than your screw size. (3/8" screw will use a 7/16" diameter hole).

Bend Length: Minimum 3/4" recommended (specify as o.d. dimension)

Available in Stainless Steel, Hotdip Galvanized After Fabrication, Electro Galvanized After Fabrication, or Plain Steel. Stainless Steel recommended for any exterior stone application. 

Note: $400 minimum total per order

275-U
275-Z

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Wire: ASTM A 641 (0.1 oz/ ft2.) 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

Firewall Anchors: Rolled Strip Zinc Alloy 710. 

(Firewall alloy 1/8” only) 

Help from the Experts