Mobile Nav Open Mobile Nav Close
192
192

Roll over image to zoom in

Bottom Flange Beam and Wall Anchor (192)

Part Number: 192

Used to tie masonry walls to horizontal steel columns. If an airspace exists between the column and the wall, the strap should be welded to the column to prevent movement from compression. Standard size is 1/8" x 1-1/4" wide with a 1-1/2" bend in lengths of 10", 12" and 14" in Stainless Steel or Hotdip Galvanized After Fabrication. Custom sizes are available.

Features and Benefits

Tie masonry walls to horizontal steel columns

Use Top and Bottom Flange Beam and Wall Anchors together

For compression loads, anchor must be welded to column flange

Standard thickness: 1/8”

Standard width: 1-1/4”

Standard lengths: 10”, 12” and 14”

Standard bend: 1-1/2”

Custom sizes available

Materials/Finishes

Stainless steel

Hot-dip galvanized after fabrication

#192 Bottom Flange Beam Anchor (Beam flanges perpendicular to wall)

Used to tie CMU wall to a structural horizontal beam with the flanges parallel to the CMU wall as shown in the detail. 

If there is an airspace between the column and the wall then the two straps should be welded or bolted to the column to prevent movement from compression. Optional holes available for bolting to column. 

Please note the flange must be level with the CMU joint. 

Available For Standard and Custom Orders

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Firewall Anchors: Rolled Strip Zinc Alloy 710.(Firewall alloy 1/8” and 16 gage only)


Help from the Experts