Roll over image to zoom in
Top Flange Beam and Wall Anchor (191)
Part Number: 191
Used to tie masonry walls to horizontal steel columns. If an airspace exists between the column and the wall, the strap should be welded to the column to prevent movement from compression. Standard size is 1/8" x 1-1/4" wide with a 1-1/2" bend in lengths of 10", 12" and 14" in Stainless Steel or Hotdip Galvanized After Fabrication. Custom sizes are available.
Resources
Submittal Sheet
2D C.A.D. DetailsFeatures and Benefits
Tie masonry walls to horizontal steel columns
Use Top and Bottom Flange Beam and Wall Anchors together
For compression loads, anchor must be welded to column flange
Standard thickness: 1/8”
Standard width: 1-1/4”
Standard lengths: 10”, 12” and 14”
Standard bend: 1-1/2”
Custom sizes available
Materials/Finishes
Stainless steel
Hot-dip galvanized after fabrication
Mill Galvanized
Zinc Alloy 710
