Mobile Nav Open Mobile Nav Close
137
137

Roll over image to zoom in

Channel Slot Pin Stone Anchor (137)

Part Number: 137

Made to Order.

Used to attach stone or CMU to backup walls with attached Channel Slots. Specify thickness, length from face of channel, steel type, pin diameter and length, and pin location from end of anchor. Width is 1-1/4".

Materials/Finishes

Stainless steel

Hot-dip galvanized after fabrication

Mill Galvanized

137 Channel Slot Pin Stone Anchor 

Used to attach stone to a backup wall with Channel Slots. (See #130, #131, #132, or #133 Channel Slots) 

Pins are available loose or welded in place. Pins furnished loose allow the stone installer to use the anchor as a template for drilling his hole into the stone. 

Hole Location: Specify as distance from end of anchor to center of hole. Hole is 1/16" larger than the diameter of the pin. 

Standards:

Width: 1-1/4”

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

 Mill Galvanized:  Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

(Zinc Alloy 710 pins cannot be welded)

 

Help from the Experts