Mobile Nav Open Mobile Nav Close
130
130

Roll over image to zoom in

Channel Slots (130)

Part Number: 130

Channel slots are welded to structural columns for adjustable attachment of masonry/veneer walls or can be attached to CMU and concrete walls using fasteners through the two holes at the top and bottom of the slot. They can also be used to replace dovetail anchor systems for concrete walls that were not cast with dovetail slots. Use with Channel Slot Anchors.

Also available to

Buy Online

Features and Benefits

Attach to structural columns beams, CMU or concrete backups.

Various Channel Slot Anchors are inserted into the slot for vertical adjustment

11 and 16 gauge thicknesses

Length: 8”

1-3/8” wide

Slot opening is 9/16”

Holes are 5/16”.

Stainless Steel, Hot Dip Galvanized, Mill Galvanized, Plain Steel

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08

Channel Slots (130)

Welded to steel columns and beams in the shop or field or attach to an existing wall using the two 5/16" diameter holes at the top and bottom. Various Channel Slot Anchors are then inserted into the slot for vertical adjustment. See #132, #131, and #133 for Additional Slot Types. See #129, #122, #123, #124, #125, and #134 for Channel Slot Brick Veneer Anchors See #127, #135, #136, #137, #138, and #139 for Channel Slot Stone Anchors Pullout Loads: for 16 gage T-Type Channel Slot Anchors pulled from channel slots 11 Gage Slot - 950 lbs failure 16 Gage Slot - 668.8 lbs failure 

Standards:

1-3/8" wide x 8" long. Slot is 9/16" x 5-1/2" Bends are 1/2" i.d. Holes are 5/16" diameter

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2 .)(0.46kg/m2 )

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08

Help from the Experts