Mobile Nav Open Mobile Nav Close
394
394

Roll over image to zoom in

Corrugated Column Anchor With Square Hole (394)

Part Number: 394

Made to Order

Used to anchor masonry walls to structural horizontal columns.

The anchor is pre-loaded onto a vertical sliding bar and the bar is then welded to the steel member. As the wall is built, the anchor is placed in the mortar joint.

3-1/4" wide. Specify length, vertical sliding bar dimension (1/2", 3/4" or 1") and steel type. Vertical Rod can be round or square.

Stainless Steel available in 3/16" or 1/8" thickness.

Zinc Alloy 710 Firewall available in 1/8" only.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

Firewall Anchors: Rolled Strip Zinc Alloy 710.(Firewall alloy 1/8” only)

#394 Corrugated Column Anchor with Square Hole

The #394 anchor is pre-loaded onto the Vertical Sliding Bar which is then welded to the steel member. As the wall is built, the anchor is placed in the mortar joint.


Note: $400 minimum total per order

Width: 3-1/4"

Material Specifications

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304.

(AISI Type 316 available upon request)

Mill Galvanized: Sheet metal anchors and

ties: ASTM A 653 G60

Firewall Anchors: Rolled Strip Zinc Alloy 710. (Firewall alloy 1/8” only)

Help from the Experts