Mobile Nav Open Mobile Nav Close

Roll over image to zoom in

Double Pintle Plate Veneer Anchor (213)

Part Number: 213

#213 Double Pintle Plate Veneer Anchors are attached directly to the backup system. Insulation/mineral wool is then placed above and below the horizontal tab. Use with #263 Double Pintle Wire Tie.

#213 Plate Tab Sizes: no insulation, 1", 1-1/2", 2", 2-1/2", 3", 3-1/2", 4"

#263 Wire Pintles 3/16" dia Lengths: 3-1/4", 4-1/4", 5-1/4"

Available in Hotdip Galvanized After Fabrication and Type 304 Stainless Steel

Also available to

Buy Online

Features and Benefits


Type 304 Stainless steel

Hot-dip galvanized after fabrication

#213 Double Pintle Brick Veneer Anchor 

The 14 gage anchor is attached directly to the backup system. Insulation is then placed above and below the wire tie tab. (Note: If ties are placed 16” on center, your insulation will have to be in 16” strips). Pintle ties are placed in the tabs allowing for 1 ¼” vertical adjustment above or below the tab. 

Thickness: 14 gage 

Note: $200 minimum total per order

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Help from the Experts