Mobile Nav Open Mobile Nav Close

Roll over image to zoom in

Ladder Pintle Eye Wall Reinforcement (1300)

Part Number: 1300

Pintle wire eyes are spaced 16" o.c. and conform to TMS 402 Building Code. Cross wires are 16" o.c. Specify insulation thickness for length of the pintle eyes as well as length of #263 pintles into veneers. (Standard Pintle lengths are 3-1/4", 4-1/4" and 5-1/4".

Available in
Standard: 9 gauge side and cross rods
Heavy Duty: 9 gauge cross rods and 3/16" side rods
Extra Heavy Duty: 3/16" side and cross rods

For CMU walls: 4", 6", 8", 10" and 12"

Corners and Tee's are available.

Available in Stainless Steel, Hot-dip Galvanized and Mill Galvanized

Features and Benefits

Diagonal cross wires spaced 16" o.c.


Type 304 Stainless Steel
Hot-Dip Galvanized after fabrication
Mill Galvanized

#1300 Ladder Pintle Eye Wire Reinforcement

Pintle wire eyes are spaced 16" o.c. and conform to the TMS 402 Building Code.

Wire deformations 8 sets per inch in compliance with ASTM A951.

Corners and Tee's are available. If required mention type and quantity in the message field.

Available in 10 ft lengths

in Lineal Feet

Material Specifications 

ASTM A951/A951M (Standard Specification for Steel Wire for Masonry Joint Reinforcement)

Stainless Steel: Wire: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft²)(0.46kg/m²)

Mill Galvanized: Wire: ASTM A 641 (0.1 oz/ ft.²)

Plain Carbon Steel: Wire: ASTM A1064/A1064M, ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Help from the Experts