Mobile Nav Open Mobile Nav Close
1200
1200

Roll over image to zoom in

Truss Type Wall Reinforcement (1200)

Part Number: 1200

Diagonal cross wires spaced 16" o.c.

Available in
Standard: 9 gauge side and cross rods
Heavy Duty: 9 gauge cross rods and 3/16" side rods
Extra Heavy Duty: 3/16" side and cross rods

For CMU walls: 4", 6", 8", 10" and 12"

Available in Stainless Steel, Hot-dip Galvanized and Mill Galvanized

Features and Benefits

Diagonal cross wires spaced 16" o.c.

Materials/Finishes

Type 304 Stainless Steel
Hot-Dip Galvanized after fabrication
Mill Galvanized

#1200 Truss Type Wire Reinforcement

Truss Wire is typically used when differential movement is not a concern, as in single wythe concrete masonry walls.

Use Ladder Type reinforcement for reinforced or grouted walls.

Wire deformations 8 sets per inch in compliance with ASTM A951.

Corners and Tee's are available. Mention type and quantity in the message field.

Available in 10 ft lengths

in Lineal Feet

Material Specifications 

ASTM A951/A951M (Standard Specification for Steel Wire for Masonry Joint Reinforcement)

Stainless Steel: Wire: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized: Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel: Wire: ASTM A1064/A1064M, ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Help from the Experts