Mobile Nav Open Mobile Nav Close
285
285

Roll over image to zoom in

Triple Split Bend Stone Anchor (285)

Part Number: 285

Made to Order

Used for anchoring stone to backups.

Specify thickness, width (3" minimum recommended), length, bend with holes, hole diameter(s) and location(s), split bend dimensions and steel type.

Available in Type 304 and Type 316 Stainless Steel

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Provide sketch with location of holes and direction of the 2 split bends if your need does not match our drawing

285 Triple Split Bend Stone Anchor

MADE TO ORDER Used for anchoring stone to backups. 

Thickness: 3/16", 1/8", 11 gage, 12 gage, & 14 gage.

Strap Width: 3" minimum recommended.

Length: Specify length as the outside dimension between the bend with the holes and the splitbends. 

Bend with Holes: 1-1/2" minimum recommended. Specify outside dimension and the diameter and location of holes in the bend. 

Split-Bends: Specify the outside dimension of the split bends. Available in Stainless Steel, or Hotdip Galvanized After Fabrication. Stainless Steel recommended for any exterior stone application

Note: $400 minimum total per order

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08

Provide sketch with location of holes and direction of the 2 split bends if your need does not match our drawing

Help from the Experts