Mobile Nav Open Mobile Nav Close
195
195

Roll over image to zoom in

Twisted Column Wall Anchor (195)

Part Number: 195

Made to Order

Used to anchor masonry walls to structural columns where the column flanges are perpendicular to the masonry wall.

1/8" thick x 1-1/4" wide with a 1-1/2" bend

Specify Overall Length, length from hook to start of twist and steel type.

Available in stainless steel, hot dip galvanized and mill galvanized.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60

Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08

#195 Twisted-Type Column Anchor 

Used to tie CMU wall back to a vertical steel column with the flanges perpendicular to the CMU wall. Anchors clip onto the left and right side of the flange and the bends are grouted in the CMU walls. If there is an airspace between the steel column and the CMU then the anchors must be bolted or welded to the column. 

(pairs)

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

Help from the Experts