217
Roll over image to zoom in
Wire Column Anchor (217)
Part Number: 217
Used to tie masonry walls to steel columns with the column flanges perpendicular to the wall. Installed in pairs 24" (609.6mm) o.c. on each side of the column. For compression loads, anchor must be welded to column flange. Length is measured from the inside of hook to the masonry bend. Order by piece.
Wire diameters: 3/16” and 1/4”
Available lengths: 10”, 12”, 14” and 16” (measured from inside of hook to masonry bend)
2” bend
Standard hook: 2-1/2” D x 1-1/2” W
Order by piece
Custom sizes available
Resources
217 Submittal SheetFeatures and Benefits
Tie masonry walls to steel columns
Use when beam flanges are perpendicular to wall
For compression loads, anchor must be welded to column flange
Materials/Finishes
Stainless steel
Hot-dip galvanized after fabrication
Mill Galvanized
