Welded Plate Strap Stone Anchor (278)

278 Welded Plate-Strap Stone Anchor

Thickness: 3/8", 1/4”, 3/16", 1/8", 11 gage, 12 gage, & 16 gage. Strap Width: 1-1/4" minimum recommended. Length: Specify length as the outside dimensions between the bend and plate. Bend with Hole: 1" minimum recommended. You should consider the overall length of the anchor and the height of the bend to make sure there is enough room for the installer to get the screw and tool in place without interference from the welded plate. Hole should be minimum of 1/16" larger than your screw size. (3/8" screw will use a 7/16" diameter hole). Plate: Specify plate size (width and length). Unless s noted, plate will be welded in center of height dimension. 

Note: $400 minimum total per order

Material Specifications

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)