Mobile Nav Open Mobile Nav Close
276 KB
276 KB

Roll over image to zoom in

Keybolt Pin Stone Anchor (276-KB)

Part Number: 276-KB

Made to Order

Used to anchor stone with the Heckmann Pos-I-Tie® Keybolt anchoring system. The Keybolt Barrel Screw installs through insulation in the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor.

Specify thickness of anchor, length, width (Minimum 1.25"), Bend with KeySlot (minimum 2.25"), diameter and length of pin and location of pin. Specify if pin is to be loose or welded in place.

Type 304 or Type 316 Stainless Steel Only

(For same anchor with a hole instead of the KeySlot see #276 Screw-On Pin-Type Stone Anchor

#276-KB Keybolt Pin-Type Anchor

Used to anchor stone with the Heckmann Pos-ITie® #75-KB Keybolt anchoring system. The Keybolt Barrel Screw installs through insulation in the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor

Note: $200 minimum total per order

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

Pos-I-Tie® KeyBolt System

Keybolt Split-Bend Stone Anchor (274-KB)

Downloads

Keybolt Z Stone Anchor (275-ZKB)

Downloads

Keybolt U Stone Anchor (275-UKB)

Downloads

Keybolt Pin Stone Anchor (276-KB)

Downloads

Keybolt Welded Plate Strap Stone Anchor (278-KB)

Downloads

Pos-I-Tie Large Steel EPDM CI Washer (75-SW)

Downloads

Help from the Experts