Mobile Nav Open Mobile Nav Close
275 ZKB
275 ZKB

Roll over image to zoom in

Keybolt Z Stone Anchor (275-ZKB)

Part Number: 275-ZKB

MADE TO ORDER

Used to anchor stone with the Heckmann #75-KB Pos-I-Tie® Keybolt Anchoring System. The Keybolt Barrel Screw installs through insulation into the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor.

Specify thickness of anchor, length, width (Minimum 1.25"), Bend with KeySlot (minimum 2.25") and bend length.

Type 304 Stainless Steel Only.

(For same anchor with a hole instead of the KeySlot see #275-Z Screw-On Z-Type Stone Anchor.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304.

Wire ties and anchors: ASTM A 580 AISI Type 304

(AISI Type 316 available upon request)

#275-ZKB Keybolt Z-Type Anchor

 Used to anchor stone with the Heckmann Pos-I-Tie® Keybolt anchoring system. The Keybolt Barrel Screw installs through insulation in the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor. 

Minimum 2-1/4"

Finish: Stainless Type 304

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Pos-I-Tie® KeyBolt System

Keybolt Split-Bend Stone Anchor (274-KB)

Downloads

Keybolt Z Stone Anchor (275-ZKB)

Downloads

Keybolt U Stone Anchor (275-UKB)

Downloads

Keybolt Pin Stone Anchor (276-KB)

Downloads

Keybolt Welded Plate Strap Stone Anchor (278-KB)

Downloads

Help from the Experts