Mobile Nav Open Mobile Nav Close
274 KB
274 KB

Roll over image to zoom in

Keybolt Split-Bend Stone Anchor (274-KB)

Part Number: 274-KB

MADE TO ORDER

Used to anchor stone with the Heckmann #75-KB Pos-I-Tie® Keybolt Anchoring System. The Keybolt Barrel Screw installs through insulation into the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor.

Specify thickness of anchor, length, width (Minimum 1.25"), Bend with KeySlot (minimum 2.25") and split-bend lengths.

Type 304 or Type 316 Stainless Steel Only.

(For same anchor with a hole instead of the KeySlot see #274 Screw-On Split-Bend Stone Anchor.

#274-KB Keybolt Split-Bend Anchor 

MADE TO ORDER 

Used to anchor stone with the Heckmann #75-KB Pos-I-Tie® Keybolt Anchoring System. The Keybolt Barrel Screw installs through insulation into the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor.

Note: $400 minimum total per order

 Finish: Stainless Type 304 

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Pos-I-Tie® KeyBolt System

Keybolt Split-Bend Stone Anchor (274-KB)

Downloads

Keybolt Z Stone Anchor (275-ZKB)

Downloads

Keybolt U Stone Anchor (275-UKB)

Downloads

Keybolt Pin Stone Anchor (276-KB)

Downloads

Keybolt Welded Plate Strap Stone Anchor (278-KB)

Downloads

Pos-I-Tie Large Steel EPDM CI Washer (75-SW)

Downloads

Help from the Experts