Mobile Nav Open Mobile Nav Close
75 SD App6
75 SD App6

Roll over image to zoom in

Pos-I-Tie® ThermalClip® System (75-TC)

Part Number: 75-TC

The Pos-I-Tie® ThermalClip® is designed for use with the Original Pos-I-Tie® Veneer Anchoring System. This new breakthrough in masonry construction adds thermal-break technology to all the advantages of the Original Pos-I-Tie® Veneer Anchoring System. It has passed NFPA 285 Testing as part of the CavityComplete® Wall system.

The clip snaps into the Pos-I-Tie® barrel loop creating a thermal break between the wire tie and the barrel. This break also allows for stainless wire ties to be used with the Zamak barrel screw.

Use #282-N Pintle Wire Ties with the ThermalClip®

Also available to

Buy Online

Features and Benefits

Snap on design locks ThermalClip® to the barrel loop creating a thermal break between the wire tie and the Pos-I-Tie® barrel screw

Creates a dissimilar metals break allowing the use of stainless-steel ties or stone anchors with the Original Pos-I-Tie®

Allows for vertical adjustment of 1-1/4" above and below the barrel

Transfers compression and tension loads to structural backup

Offers speedy, cost-saving installation

Proprietary Plastic Material

Decreases thermal transfer

Has very low thermal conductivity, over 100 times less than metals such as steel

Highly flame resistance with a UL 94 V-0 rating

Tolerant in “freeze-thaw” conditions and with alkaline in mortar

Prevents galvanic reaction from dissimilar metals

Compatible with Double Pintle Wire Ties and ThermaClip® Stone Anchors

Materials/Finishes

Proprietary plastic

#75 Pos-I-Tie® ThermalClip®

The Pos-I-Tie® ThermalClip® is designed for use with the Original Pos-I-Tie® Veneer Anchoring System. This new breakthrough in masonry construction adds thermal-break technology to all the advantages of the Original Pos-I-Tie® Veneer Anchoring System. It has passed NFPA 285 Testing as part of the CavityComplete® Wall system.

The Pos-I-Tie® system is a single barrel screw that penetrates insulation/gypsum to provide a solid connection with the backup wall for transfer of lateral loads while sealing the exterior hole with an EPDM washer and an optional #610 Thermal-Grip® 2” continuous insulation washer.

The Original Pos-I-Tie® is a two piece system consisting of a barrel screw and a looped triangle wire tie.

The Pos-I-Tie® ThermalClip® can be attached to the barrel screw and a pintle wire tie is used instead of the looped triangle tie.

Compliant with TMS 402 Building Code for Masonry Structures.

Passed ASTM E23457 and E331 Air Leakage and Water Resistance tests and ASTM E119 Structural Fire Resistance test.

Passed NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation with the CavityComplete® wall system.

Select back up for proper screw type
For walls with Continuous Insulation
For walls that require a Thermal Brake

Material Specifications

Barrel: ASTM B86 (92% Zinc Alloy)

Screw: ASTM A510 (Carbon Steel)

ASTM C954 (1000 hr polymer coating)

Wire Tie: Stainless – ASTM A580 AISI Type

304.

Plain – ASTM A82/A82M Tensile 80KSI Yield –

70KSI.

Hotdip Galvanized: ASTM A 153 Class B-2:

(1.50 oz/ ft2.)(0.46kg/m2)

ThermalClip®: Radel® R-5000

polyphenylsulfone resin/polymer

Compatible with all back-up walls

Self-Drilling Screw

Used for: steel stud 18 ga – 14 ga

Concrete/CMU Screw

Used for: concrete, CMU, wood, brick, ICF

Structural Screw

Used for: structural steel

Barrel Lengths

Thermal Clip

Learn More

Thermal-Grip Plastic Washers

Learn More

Original Pos-I-Tie Installation Tool

Learn More

Help from the Experts